Product ID:NORCAST A4000 PART A
MSDS Date:12/13/1993
FSC:8040
NIIN:01-079-9165
Kit Part:Y
MSDS Number: CHHRC

R.H.CARLSON COMPANY,INC.

41-CHESTNUT STREET
GREENWICH, CT 06830-5921
US

Emergency Phone: 800-424-9300 CHEMTREC

Info Phone: 203-531-5500

Cage: 33530

R.H.CARLSON COMPANY,INC.

1687 GREENWICH, CT 06830-5921 US

Telephone: 203-531-5500

Cage: 33530

TOLUENE (SARA 313) (CERCLA)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 30-60%

OSHA PEL 200 PPM; Z-2

ACGIH TLV: S, 50 PPM; 9596

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

BENZENE (SARA 313) (CERCLA)

CAS: 71-43-2

RTECS: CY1400000

Fraction By Weight: <0.045%

OSHA PEL SEE 1910.1028

ACGIH TLV: 10 PPM; A2; 9596

EPA Report Quantity: 10 LBS

DOT Report Quantity: 10 LBS

MQ RESIN

Fraction By Weight: 30-60%

DIMETHYL POLYSILOXANE SILANOL/ST

Fraction By Weight: 10-30%

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE IRRITATION. INGESTION MAY
CAUSE GI TRACT IRRITATION. INHALATION MAY CAUSE CNS EFFECTS.
DECOMPOSITION OF METHYLPOYLSILOXANES MAY PRODUCE FORMALDEHYDE WHICH
IS A SKIN & RESPIRATORY TRACT SENSI TIZER, EYE & NOSE IRRITANT,
ACUTE TOXICANT AND POTENTIAL CANCER HAZARD.
Explanation of Carcinogenicity:NONE OF THE INGREDIENTS IN THIS PRODUCT
IS LISTED BY NTP, IARC OR OSHA AS A CARCINOGEN.
Effects of Overexposure:MAY CAUSE IRRITATION-AVOID CONTACT WITH SKIN,
EYES & CLOTHES. INGESTION-ABDOMINAL PAIN, DIARRHEA, NAUSEA,
VOMITING. INHALATION-HEADACHES, DIZZINESS, NAUSEA, INCOORDINATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES-FLUSH WITH WATER FOR 15 MINUTES, HOLD LIDS OPEN. GET
MEDICAL ATTENTION. SKIN-WASH WITH SOAP & WATER. GET MEDICAL
ATTENTION IF SYMPTOMS PERSIST. INHALED-REMOVE TO FRESH AIR. RESTORE
BREATHING AS N EEDED. GET MEDICAL ATTENTION. INGESTED-DO NOT INDUCE
VOMITING! IF CONSCIOUS, GIVE SEVERAL GLASSES WATER TO DRINK. SEEK
IMMEDIATE MEDICAL ATTENTION.

Flash Point Method:TCC
Flash Point:35.0F,1.7C
Lower Limits:1.2
Upper Limits:7.0
Extinguishing Media:USE STANDARD FIREFIGHTING TECHNIQUES.
Fire Fighting Procedures:WEAR PROTECTIVE EQUIPMENT AND A FULL FACED
SELF CONTAINED BREATHING APPARATUS. COOL FIRE EXPOSED CONTAINERS
WITH WATER SPRAY. EVACUATE NON-ESSENTIAL PERSONNEL.
Unusual Fire/Explosion Hazard:DLA-HMIS: VAPORS HEAVIER THAN AIR.CAN
TRAVEL TO IGNITION SOURCE AND FLASHBACK. COMBUSTION OR HEAT OF FIRE
MAY PRODUCE HAZARDOUS DECOMPOSITION PRODUCTS & VAPORS.

Spill Release Procedures:WEAR PROTECTIVE CLOTHING & GOGGLES. SOAK UP
LIQUID WITH ABSORBENT, SUCH AS SAWDUST, CLAY OR OIL ABSORBER. SWEEP
UP ABSORBED MATERIAL & PLACE IN CHEMICAL WASTE DRUM FOR DISPOSAL.
WASH AREA WITH DETERG ENT & WATER, FLUSH WITH WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID CONTACT WITH SKIN & EYES.USE
GROUND STRAP & STORE UPRIGHT IN A COOL PLACE BELOW 85F.USE IN A
WELL-VENTILATED AREA.
Other Precautions:KEEP AWAY FROM IGNITION SOURCES. PEOPLE USING CONTACT
LENSES SHOULD TAKE EXTRA PRECAUTIONS TO PREVENT EYE
CONTACT/EXPOSURE.

Respiratory Protection:HANDLE IN A WELL-VENTILATED AREA. IF ADEQUATE
VENTILATION NOT AVAILABLE, USE NIOSH-APPROVED ORGANIC VAPOR
RESPIRATOR. WHERE EXPOSURE NECCESITATES A HIGHER LEVEL OF
PROTECTION, A POSITIVE PRESSURE AIR SUPPLY RESPIRATOR IS
RECOMMENDED.
Ventilation:GENERAL MECHANICAL VENTILATION (DLA-HMIS: EXPLOSION-PROOF)
IS SUGGESTED IN A CLOSED AREA.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL SAFETY GOGGLES.
Other Protective Equipment:PROTECTIVE APRON (RUBBER) OR COVERALLS.
Work Hygienic Practices:USE GOOD PERSONAL HYGIENIC PRACTICES.
Supplemental Safety and Health
KEY1:F3. THIS IS PART A OF A 2-PART PRODUCT. FOR PART B, SEE PNI D,
SAME NSN.

HCC:F2
Boiling Pt:B.P. Text:232F,111C
Vapor Pres:22
Vapor Density:3.2
Spec Gravity:0.99
Evaporation Rate & Reference:1.9 (BUTYL ACETATE = 1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR LIQUID; AROMATIC ODOR.
Percent Volatiles by Volume:45

Stability Indicator/Materials to Avoid:YES
CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:KEEP AWAY FROM HIGH HEAT, OPEN FLAMES.
AVOID ALL SOURCES OF IGNITION.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
SILICONE DIOXIDE, FORMALDEHYDE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:MATERIAL THAT CANNOT BE USED SHOULD BE DISPOSED
OF IN AN EPA AUTHORIZED FACILITY. DISPOSE OF EMPTY CONTAINERS
ACCORDING TO ANY APPLICABLE REGULATIONS UNDER RCRA.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.